Suhr SL68 MK II Amplifier Head 100w
Mid-Boost Switch: Dial in the perfect amount of midrange punch to cut through the mix. The Mid-Boost give a bit more gain to the phase inverter and a subtle lift to the tonestack, boosting the gain to the mid range. Most usefull when dimeing the controls.
3-Way Bright Switch: Add brilliance and sparkle to your tone, with clarity and presence. This switch allows you to choose between 3 different values, ‘Off’ is the original SL series, all-the-way bright which is the stock value found in vintage amps and a middle position that is somewhere in between.
New Master Volume Control
Say goodbye to the need for external attenuators. Our redesigned Master Volume circuit gives you total control over your amp’s output, preserving your tones unique character, whether you’re in a bedroom jam or commanding the stage. This type of master volume control is highly effective at transparently controlling the output of the amp. When the control is at 10, it is completely transparent and out of the circuit. Start turning it down, and the amps volume can be reduced all the way to whisper levels.
Variac (Low-Power) Mode
The three position power switch incorporates a low power Variac™* mode which lowers the amount of voltage available to the amp. This classic mod makes the amp feel much more spongy with a smoother attack and has been the foundation for some of the greatest rock tones of all time. To avoid having to re-bias the amp when switching power modes, SL amplifiers have two internal bias adjustments, one for HI power, the other for LOW.
Custom “Plexi” Output Transformer
Output transformers have a major impact on tone. It’s the bridge between the output section of the amplifier and your speaker cabinet. We’ve spent countless hours listening to different transformers until the spec was finalized for our custom “PLEXI” output transformer. This transformer sounds clear, is dynamic, and lends authoritative authenticity to the amplifier.
Specifications:
- SKU: A-SL68
- Output: 100 watts RMS
- Preamp Tubes: 3x 12AX7
- Power Tubes: 4x EL34
- Front Panel: OFF/HI/LOW Power Select Switch, Presence, Bass, Middle, Treble, Volume
- I, Volume II controls and four Inputs, 2-way FAT and BST switches, 3-way BRT switch
- Back Panel: Master Volume, two Speaker outputs, Impedance Selector (4Ω, 8Ω, & 16Ω),
- HT Fuse, Mains AC Inlet and Mains Fuse
- H.T. Fuse: F 0.5A/250V (Fast-Blo)
- Dimensions: 29-1/8" (W) X 11-5/8" (H) X 8-1/4" (D)
- Weight: 47lbs