{"product_id":"jhs-pedals-wanderer-overdrive-pedal-10-13-10am-cst","title":"JHS Pedals Wanderer Overdrive Pedal (10\/13 10am CST)","description":"\u003cp\u003eA Morning Glory, a NOTAKLÖN and the best features you've ever seen, in one compact enclosure.\u003c\/p\u003e\n\u003cp\u003eThe first pedal in our new vertical two-in-one format with top-mounted jacks and power. Individual input and output jacks for each circuit — put anything between them, or give each side its own loop on a switcher.  Expansive configuration flexibility. Red Remote jack for each circuit. Four separate gain stages, instantly accessible for live and studio use in one pedal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEvery board I've owned since 2009 has had the same two pedals on it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA Morning Glory and something Klon-esque have been on my pedalboards for as long as i can remember. The Morning Glory because I designed it as my take on the Marshall Bluesbreaker, and it's the best-selling pedal we’ve ever made. The Klon circuit because in 1995 Bill Finnegan built an overdrive that did the version of high gain overdrive I had always wanted, and I've been collecting and modifying them ever since. My JHS modification of his KTR was called the Shamrock mod, a nod to the Boston Celtics logo, because Bill and the Klon are from Boston and Larry Bird is my hero. In 2023 that mod became featured in the JHS Pedals NOTAKLÖN, a solderless DIY kit you build yourself.\u003c\/p\u003e\n\u003cp\u003eThose two pedals are all the dirt I need and they do everything I want. I could do a gig with this pair of drives and a delay pedal and be perfectly happy.\u003c\/p\u003e\n\u003cp\u003eThe problem with every two-in-one we've ever made — and almost everyone else’s — is that the two circuits are connected. You can flip which one comes first, but you can't put anything between them, and you can't give each side its own loop on a switcher. People asked us for independent jacks about a thousand times and we did it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot a Double Barrel with a new circuit dropped in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Wanderer has four jacks. Use the main input on the far right and the main output on the far left and it behaves just like every two-in-one we've ever built, with a center toggle that points at whichever circuit is first in the series. \u003c\/p\u003e\n\u003cp\u003eUse all four individual I\/O jacks instead and the two circuits become completely independent. Put a compressor between them. Put a fuzz between them. Put your whole pedalboard between them — we don't know why you would, but you can. Or run each side into its own loop on a switcher and save them in presets like two separate pedals. That's what they are. They just share a case and a power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour gain stages from two footswitches.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach side has a toggle, and each toggle has a Red Remote jack that lets you use our Red Remote switch to activate the onboard toggle. Most gain toggles on overdrive pedals just swap out the clipping diodes. Not here. Flip the Morning Glory Gain toggle and an entire additional gain stage comes into the circuit — the LED turns red, and the pedal comes alive with more gain, a slight volume boost and a fuller sound. Flip the NOTAKLÖN +\/- toggle and you get the Shamrock mod: +4 dB of gain, more midrange, and an additional stage of hard clipping. Down is the original Klon voicing, exactly replicated. Up is the mod.\u003c\/p\u003e\n\u003cp\u003ePlug a Red Remote into either jack and you flip that toggle with your foot. Any latching amp-style footswitch works, and if you run a switcher with amp-control outputs, it can flip both from a preset — no Red Remote needed. Morning Glory stock, Morning Glory high gain, NOTAKLÖN stock, NOTAKLÖN with the mod. Two rhythm sounds and two lead sounds without touching a knob. With these four tones and the ability to stack them, reorder them and add other pedals in-between — the options are staggering. This is the best two-in-one format on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE IT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMorning Glory first, on all the time, at the edge of breakup with the tone controls flat. Stack the NOTAKLÖN on top for the rhythm sound. Red Remote on the Morning Glory for the bigger rhythm, Red Remote on the NOTAKLÖN for the lead boost. That's how Josh runs it.\u003c\/p\u003e\n\u003cp\u003eIf you like your heavier drive first, flip the order toggle. If you run a switcher, use the individual jacks and forget the order toggle exists — it's out of the circuit in that configuration.\u003c\/p\u003e\n\u003cp\u003eThe NOTAKLÖN side with Gain fully counterclockwise is a clean boost, up to +16dB with the Volume. Push an amp that's already breaking up.\u003c\/p\u003e\n\u003cp\u003eSingle coils and humbuckers both work. If your rig is already bright, the Bright Cut switch on the Morning Glory side pulls the top end down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHO THIS IS FOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you already run a Morning Glory and a Klon-style pedal as a pair, this is your drive section in one pedal in a space-saving format with both circuits benefitting from Red Remote functionality. \u003c\/p\u003e\n\u003cp\u003eIf you run a switcher and avoided the inseparability of two-in-one pedals, the individually isolated I\/O jacks solves this for you.\u003c\/p\u003e\n\u003cp\u003eIf you're new to us and want the two overdrives that this company loves most, start here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTROLS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLEFT SIDE — NOTAKLÖN\u003cbr\u003eVolume — Controls the output volume. Counterclockwise is less, clockwise is more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGain — Controls the amount of overdrive. Fully counterclockwise is clean, allowing up to +16dB of clean boost in conjunction with the\u003c\/li\u003e\n\u003cli\u003eVolume control. Fully clockwise is maximum overdrive. As the control is turned clockwise, the mid frequencies also increase.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTreble — Controls the amount of treble boost or cut. Noon is neutral.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e+\/- Toggle — \"Shamrock Mod.\" Increases the overall gain by +4 dB, increases midrange, and engages an additional stage of hard clipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRIGHT SIDE — MORNING GLORY V4\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolume — Controls the output volume. Counterclockwise is less, clockwise is more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrive — Controls the amount of drive or gain. As the Drive is increased, it also adds brightness. Counterclockwise is less, clockwise is more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTone — Controls the amount of brightness. Clockwise is brighter, counterclockwise is darker.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGain Toggle — Engages high gain mode when flipped up. The LED will turn red to indicate high gain mode is active.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBright Cut Switch — Inset switch on the right side of the pedal that cuts the highest frequencies if the overall tone is too bright.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOrder Toggle — The center toggle allows you to select which effect comes first in the signal chain for different tones when stacking both sides. The toggle points toward whichever effect is first in the chain.\u003c\/li\u003e\n\u003cli\u003eThe Order toggle has no effect when using the individual FX jacks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilent Soft-Touch Switching, Buffered Bypass\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndividual input and output jacks for each circuit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRed Remote jack for each circuit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTop-mounted jacks\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e9VDC Center Negative, 165mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTHIS PEDAL MEASURES 4.7” X 3.5” X 1.5” AND CONSUMES 165mA. DO NOT USE MORE THAN 9VDC. DAMAGE MAY OCCUR AND YOUR WARRANTY WILL BE VOIDED.\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":67611197931833,"sku":"JHSWND","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2244\/3885\/files\/wand.jpg?v=1791340611","url":"https:\/\/www.visionguitar.com\/products\/jhs-pedals-wanderer-overdrive-pedal-10-13-10am-cst","provider":"Vision Guitar","version":"1.0","type":"link"}