Faber® NSWKIT STEEL Bridge Studs/Thumbwheels for Nashville equipped guitars This is the solution for owners of Nashville equipped guitars who want ...
View full details
Faber® NSWKIT STEEL Bridge Studs/Thumbwheels for Nashville equipped guitars This is the solution for owners of Nashville equipped guitars who want ...
View full details
Sold out
Faber® ABRM Bridge: For 4MM metric bridge posts and the Faber® E-Sert™, when the E-Sert™ is used for conversion of Epiphone and many other non U.S....
View full details
Sold out
Faber® ABRM Bridge: For 4MM metric bridge posts and the Faber® E-Sert™, when the E-Sert™ is used for conversion of Epiphone and many other non U.S...
View full details
Sold out
Perhaps the most vintage correct replacement bridge available on the market today! No rattle-causing retainer wire! Flat top saddles provide tight,...
View full details
Replacement saddles screws for Faber® bridges. Includes 3 each of saddle screw, teflon washer, and retaining ring. Set of 3 Faber saddle screws H...
View full details
These inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full details
These inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full details
These inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full details
Faber® Metric Tailpiece Bushings, for Epiphone and most other non USA made guitars. Replace the cheap, non-steel original tailpiece bushings with a...
View full details
Faber® ABR-1 Style bridge studs and thumbwheels are a great choice for new builds, where vintage specs are important. Studs are the finest quality ...
View full details
Sold out
Faber® ABR-1 Style bridge studs and thumbwheels are a great choice for new builds, where vintage specs are important. Studs are the finest quality ...
View full details
Replacement saddles, WITH small starter notches dead center, for all Faber® bridges that have removable saddles. Includes extra retaining Replaceme...
View full details
Replacement saddles, WITH small starter notches dead center, for all Faber® bridges that have removable saddles. Includes extra retaining Replaceme...
View full details
These studs are made to original vintage spec, from the finest available German steel, in 5/16-24 thread pattern. Will fit any USA made Gibson® wit...
View full details
These studs are made to original vintage spec, from the finest available German steel, in 5/16-24 thread pattern. Will fit any USA made Gibson® wit...
View full details
Faber iNsert™ Gloss Nickel, “Plus” conversion posts for Gibson® with Nashville and Heritage® with Schaller bridges.With the Faber® iNsert™, you now...
View full details
Faber iNsert™ Aged Nickel, “Plus” conversion posts for Gibson® with Nashville and Heritage® with Schaller bridges.With the Faber® iNsert™, you now ...
View full details
Faber iNsert™ Gloss Gold, “Plus” conversion posts for Gibson® with Nashville and Heritage® with Schaller bridges.With the Faber® iNsert™, you now h...
View full details
Faber iNsert™ Gloss Gold, “Plus” conversion posts for Gibson® with Nashville and Heritage® with Schaller bridges.With the Faber® iNsert™, you now h...
View full details
Our “PLUS” USA/ABR-1 conversion posts replace the original “sloppy” bridge bushings and integrated posts. The Faber® German steel one piece bushing...
View full details
Following up on the success of the innovative Faber® iNsert, we are happy to announce the new Faber® E-sert, for most Epiphone and many other Japa...
View full details
These inserts will accept the Faber® Tone-Lock™ studs, Faber® “Vintage” Steel Studs, or any 5/16-24 thread pattern tailpiece studs (i.e., stock USA...
View full details
Sold out
Faber® Metric Tailpiece Bushings, for Epiphone and most other non USA made guitars. Replace the cheap, non-steel original tailpiece bushings with a...
View full details
These studs are made to original vintage spec, from the finest available German steel, in 8M x 1.25 thread pattern. Will fit most imports with 8M x...
View full details
These studs are made to original vintage spec, from the finest available German steel, in 8M x 1.25 thread pattern. Will fit most imports with 8M ...
View full details
All Pro Sustainer System™ parts can now be ordered in one convenient “Master Kit,” at a 5% discount over buying the parts separately. The Tone-Lock...
View full details
Sold out
Faber's best sustain & tone enhancing products in one convenient “Master Kit,” at a 5% discount over buying the parts separately!Standard in th...
View full details
Faber's best sustain & tone enhancing products in one convenient “Master Kit,” at a 5% discount over buying the parts separately!Standard in th...
View full details
Sold out
Faber's best sustain & tone enhancing products in one convenient “Master Kit,” at a 5% discount over buying the parts separately!Standard in th...
View full details
Sold out
All Pro Sustainer System™ parts can now be ordered in one convenient “Master Kit,” at a 5% discount over buying the parts separately. The Tone-Lock...
View full details
Faber® ABR-1 Style bridge studs and thumbwheels are a great choice for new builds, where vintage specs are important. Studs are the finest quality ...
View full details
Faber® ABRM Bridge: For 4MM metric bridge posts and the Faber® E-Sert™, when the E-Sert™ is used for conversion of Epiphone and many other non U.S....
View full details
Faber® ABRM Bridge: For 4MM metric bridge posts and the Faber® E-Sert™, when the E-Sert™ is used for conversion of Epiphone and many other non U.S....
View full details
Replacement saddles screws for Faber® bridges. Includes 3 each of saddle screw, teflon washer, and retaining ring. Set of 3 Faber saddle screws H...
View full details
Replacement saddles screws for Faber® bridges. Includes 3 each of saddle screw, teflon washer, and retaining ring. Set of 3 Faber saddle screws H...
View full details
The BSWKIT will give your Nashville bridge equipped guitar the “vintage” look, while, at the same time, enhancing your tone with steel posts that p...
View full details
The BSWKIT will give your Nashville bridge equipped guitar the “vintage” look, while, at the same time, enhancing your tone with steel posts that p...
View full details
The BSWKIT will give your Nashville bridge equipped guitar the vintage look, while, at the same time, enhancing your tone with steel posts that pro...
View full details
Following up on the success of the innovative Faber® iNsert, we are happy to announce the new Faber® E-sert, for most Epiphone and many other Japan...
View full details
At Faber®, innovation never stops! Introducing “Tone-Bar™” – the next generation in compensated wraparound bridges/tailpieces. Utilizing “tone-ba...
View full details
These studs are made to original vintage spec, from the finest available German steel, in 5/16-24 thread pattern. Will fit any USA made Gibson® wit...
View full details
Sold out
And when things are combined, is anything lost? And when something is lost, will there ever be more? But what is the gain?The ~900 is a ferocious f...
View full details
As you wait for the next tray of free food on platters held by white gloves, notice the contrasts that emerge from the hunger and tensions within t...
View full details
A state-variable filter with wide range and application. Versatile. Combining tilt and notch/boost equalization around a 2nd-order (-12dB/octave) s...
View full details
Imparting a dark and tape-like quality to your sound, this analogue delay offers a rich and distinct character for you to wallow in luxury, self-ri...
View full details
For everyone out there who never turns off their Barbershop, this is for you. The same circuit in a tiny box, no bypass switch, no light. You can ...
View full details
At its finest, in a considerably small package, powered by your typical 9V power supply, all analogue, hand stamped, pure sine wave oscillator, low...
View full detailsSubscribe for the latest information on new products and promotions.
Monday 11AM - 4PM
Tuesday 11AM - 4PM
Wednesday 11AM - 4PM
Thursday 11AM - 4PM
Friday 11AM - 4PM
Saturday 10AM - 3PM
Sunday Closed
EMAIL
Info@VisionGuitar.com
For Pedalboard Build Inquiries:
Bryan@VisionGuitar.com
Matt@VisionGuitar.com
STORE ADDRESS
6300 San Ignacio Ave Suite C
San Jose, CA 95119
Copyright © 2026 Vision Guitar.