This IEC AC Mains connector features an integrated on/off switch as well as a power line noise filter. Use to power up your under mounted power sup...

This splitter adapter cable divides one Pedal Power output to two pedals. The splitter has two 2.1mm jacks which will connect to any 2.1mm plug. Th...

The most widely used cable with 2.1mm right angle connectors on each end and standard (center negative) polarity. Used with a majority of popular p...

The FPS-18 is our new Class2, Regulated 18 volt, 300mA adapter which replaces the international IPS-18. Unlike the IPS-18, the FPS-18 is only for u...

Current Doubler Adapter For pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power o...

This ISO-5 Cable Kit includes;   5.5x2.1mm right angle barrel connectors (Quantity of 4): Most popular... Boss, Danelectro, Prescription, Guyaton...

The most widely used cable with 2.1mm right angle connectors on each end and standard (center negative) polarity. Used with a majority of popular p...

Filter, regulate, isolate, and protect!Pedal Power 2 Plus does it, and does it well, because any less will degrade your pedalÕs performance. Player...

2.5mm and 2.1mm Right Angle Plugs Cable A cable with a 2.1mm right angle and 2.5mm (red) right angle barrel connector and reverse (center positive)...

For pedals with higher voltage requirements, use this voltage doubling cable with three 2.1mm straight barrel ends to combine two Pedal Power outpu...

The Fulltone IPS-9 is the first Noise-Free "switching" power supplies for pedals! These can be used in any country, at any voltage from 100-240VAC ...

For pedals with higher voltage requirements, use this voltage doubling adapter with a 2.1mm jack to combine two Pedal Power outputs to make 18V or ...

A battery snap works with any effect that runs on 9V battery including vintage pedals without power jacks. For use with Voodoo Lab power supplies O...

A cable with a 2.1mm right angle barrel and a 3.5mm right angle mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connecti...

2.1mm Straight and Right Angle Barrel Cable The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (cente...

Voodoo Lab 9V Battery Snap and 2.1mm Straight Barrel Cable A battery snap works with any effect that runs on 9V battery including vintage pedals w...

Combines two high current Pedal Power outputs (400mA or greater) to power Line 6 HX Effects or HX Stomp. This cable features two BLACK 2.1mm barrel...

2.1mm Straight Barrel Cable The most widely used cable with 2.1mm straight barrel connector on each end and standard (center negative) polarity. Us...

2.5mm Voltage Doubling Cable - 18V or 24V For pedals with higher voltage requirements, use this voltage doubling reverse (center positive) cable wi...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority o...

The most widely used cable with 2.1mm right angle connectors on each end and standard (center negative) polarity. Used with a majority of popular p...

Voodoo Lab Pedal Power 2 Plus (120v) Filter, regulate, isolate, and protect!Pedal Power 2 Plus does it, and does it well, because any less will deg...

Pedal Power X4 is a professional isolated power supply for up to four battery operated or high current DSP effects. Housed in an ultra-compact alum...

A cable with 2.1mm right angle connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfooger...

2.1mm Barrel Cable The most widely used cable with 2.1mm straight barrel connector on each end and standard (center negative) polarity. Used with a...

2.1mm Straight and Right Angle Barrel Cable The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (cente...

This PowerCON Locking AC Mains connector features the industry standard Neutrik PowerCON connector. Use to power up your under mounted power suppl...

2.1mm Barrel Cable The most widely used cable with 2.1mm straight barrel connector on each end and standard (center negative) polarity. Used with a...

Pedal Power X4 is a professional isolated power supply for up to four battery operated or high current DSP effects. Housed in an ultra-compact alum...

Use a Pedal Power AC and this 4-Pin DIN connector cable to power the Voodoo Lab GCX Audio Switcher or System Mix Plus. Please allow an extra two we...

10ft 14AWG Power Cord Amplifier Cable (C13/5-15P) - Black 14AWG are very robust cables; extra thick and heavy duty to handle connections to the be...

Pedal Power AC Cable:This cable with two 2.5mm straight barrel connectors powers units like the Digitech Whammy, Line 6 Digital Modelers and Mesa ...

Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the PA-9 Power-All to five effect pedals. The ...

Isolated power supply for pro stage and studio use! The Pedal Power ISO-5 is an isolated power supply for powering guitar pedal effects and accesso...

6ft 14AWG Power Cord Amplifier Cable (C13/5-15P) - Black 14AWG are very robust cables; extra thick and heavy duty to handle connections to the beef...

Replacement pack for all 8-output Voodoo Lab power supplies: Pedal Power 3 / 2 PLUS / 4X4 / X8 Part #PPBAR-RS - 6 cables with 2.1mm straight &...