Way Huge WM25 Smalls STO Drive
Way Huge
The Way Huge Smalls STO delivers smooth, silky overdrive thatsounds like the purr of a freshly tuned-up muscle car. The circuit thatit’s based on h...
View full details
The Way Huge Smalls STO delivers smooth, silky overdrive thatsounds like the purr of a freshly tuned-up muscle car. The circuit thatit’s based on h...
View full details
Sold out
Designed in conjunction with bluesman Joe Bonamassa, the Way Huge Smalls Overrated Special Overdrive delivers a range of bold, punchy grit. Jeorge ...
View full details
The Supa-Lead Overdrive is designed to get amp-like crunch tones from a clean or slightly dirty amp, producing a focused midrange grind with an abu...
View full details
Sold out
The Aqua-Puss Analog Delay is famous for its bright, jangly repeats and wonderfully straightforward operation. Now, all of that wholesome goodnes...
View full details
This pedal combines a phase shifter and an envelope filter into a single dangerous machine for fifty shades of rude behavior that’ll turn a pleasan...
View full details
WBT makes the finest silver solder on the market. WBT lead free solder is the highest quality solder with 4% fine silver content. The halogen-free ...
View full details
Please note that this pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexico Fender® Stratocasters® post 2002 prod...
View full details
Please note that this pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexico Fender® Stratocasters® post 2002 prod...
View full details
This is a quality pickguard made in the USA by WD Music. This pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexi...
View full details
This is a quality pickguard made in the USA by WD Music. This pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexi...
View full details
Sold out
This 11 piece nut file set contains files for the following string gauges -.010 in., .013 in., .016 in., .024 in., .028 in., .032 in., .036 in., .0...
View full details
This is a vast improvement over the original Bigsby® OEM bridge, which has no provision for intonation. This bridge is fully intonatable on all six...
View full details
This is a vast improvement over the original Bigsby® OEM bridge, which has no provision for intonation. This bridge is fully intonatable on all six...
View full details
This is a vast improvement over the original Bigsby® OEM bridge, which has no provision for intonation. This bridge is fully intonatable on all six...
View full details
Sold out
Please note that this pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexico Fender® Stratocasters® post 2002 prod...
View full details
Sold out
Well made 3-ply Strat pickguard in Cream-Black-Cream color that fits Fender USA. Please note that this pickguard will only fit genuine U.S. produc...
View full details
Sold out
Please note that this pickguard will only fit genuine American Standard P Bass®. This will not fit a Squier®. Right hand model Fits Fender Ameri...
View full details
This replacement pickguard is a direct fit for both Fender® Lone Star Stratocaster® (two single coils and one humbucker) and the Fender® American D...
View full details
Please note that this pickguard will only fit genuine vintage 20 fret Fender® Jazz Bass® from the '70's and '80's. Without thumbrest holes. This pi...
View full details
Please note that this pickguard's mounting hole pattern will only fit genuine Fender® U.S. (post 1963) or Fender® made in Mexico (post 2002) Strato...
View full details
WD quality nickel jack plate with 2 stainless steel screws.
This pickguard is made to fit the Old Style 11 Hole Fender® Stratocaster® mounting hole pattern that was used by Fender® in late '59 up to '62. Thi...
View full details
This pickguard is made to fit the Old Style 11 Hole Fender® Stratocaster® mounting hole pattern that was used by Fender® in late '59 up to '62. Thi...
View full details
This pickguard is an exact template of the Eric Clapton, Eric Johnson and SRV signature series guitars. It is designed after the original 1954-1959...
View full details
This pickguard is an exact template of the Eric Clapton, Eric Johnson and SRV signature series guitars. It is designed after the original 1954-1959...
View full details
WD Music knobs offer a high quality alternative to Gibson knobs at a more reasonable price. These are US spec and fit any standard US 24 knurl spli...
View full details
WD Music knobs offer a high quality alternative to Gibson knobs at a more reasonable price. These are US spec and fit any standard US 24 knurl spli...
View full details
Sold out
WD Music knobs offer a high quality alternative to Gibson knobs at a more reasonable price. These are US spec and fit any standard US 24 knurl spli...
View full details
WD Music knobs offer a high quality alternative to Gibson knobs at a more reasonable price. These are US spec and fit any standard US 24 knurl spli...
View full details
This is a top quality PRS upgrade kit featuring True 500k CTS pots, Sprague orange drop caps, Switchcraft jack, and Gavitt wire. This is great for ...
View full details
This pickguard was designed in the 1970's when many players were removing the single coil pickups and routing the body to install a humbucker in bo...
View full details
This rhythm treble switch washer is nearly identical to those used by Gibson® and are sourced from the same supplier.
This rhythm treble switch washer is nearly identical to those used by Gibson® and are sourced from the same supplier.
This rhythm treble switch washer is nearly identical to those used by Gibson® and are sourced from the same supplier.
This single coil pickup cover (sold in set of 3) fits the single coil pickup design most notably mounted in the Fender® Stratocaster® since its dev...
View full details
This single coil pickup cover (sold in set of 3) fits the single coil pickup design most notably mounted in the Fender® Stratocaster® since its dev...
View full details
Here is a quality switch tip for your project. Fits CRL and Oak Grigsby USA made switches. (1) Strat switch tip Amber Fits US CRL and Oak switche...
View full details
Here is a quality switch tip for your project. Fits CRL and Oak Grigsby USA made switches. (1) Strat switch tip Black Fits US CRL and Oak switches...
View full details
Sold out
Here is a quality switch tip for your project. Fits CRL and Oak Grigsby USA made switches. (1) Strat switch tip Cream Fits US CRL and Oak switches...
View full details
Here is a quality switch tip for your project. Fits CRL and Oak Grigsby USA made switches. (1) Strat switch tip Chrome Fits US CRL and Oak switch...
View full details
Here is a quality switch tip for your project. Fits CRL and Oak Grigsby USA made switches. (1) Strat switch tip Gold Fits US CRL and Oak switches...
View full details
Here is a quality switch tip for your project. Fits CRL and Oak Grigsby USA made switches. (1) Strat switch tip White Fits US CRL and Oak switches...
View full details
Sold out
Please note that this pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexico Fender® Stratocasters® post 2002 prod...
View full details
Please note that this pickguard will only fit genuine U.S. production Fender® Stratocaster® or Made in Mexico Fender® Stratocasters® post 2002 prod...
View full details
Sold out
This pickguard was designed in the 1970's when many players were removing the single coil pickups and routing the body to install a humbucker in bo...
View full details
Sold out
Please note that this pickguard's mounting hole pattern will only fit genuine Fender® U.S. (post 1963) or Fender® made in Mexico (post 2002) Strato...
View full details
Sold out
This is a quality pickguard made in the USA by WD Music. Please note that this pickguard will only fit genuine Fender¨ Telecaster¨ with a standard ...
View full detailsSubscribe for the latest information on new products and promotions.
Monday 11AM - 4PM
Tuesday 11AM - 4PM
Wednesday 11AM - 4PM
Thursday 11AM - 4PM
Friday 11AM - 4PM
Saturday 10AM - 3PM
Sunday Closed
EMAIL
Info@VisionGuitar.com
STORE ADDRESS
6300 San Ignacio Ave Suite C
San Jose, CA 95119
Copyright © 2026 Vision Guitar.
Please fill out the following form to declare your withdrawal from the contract.