Guitar Hardware

Callaham (3) Enhanced Vintage Brass Compensated Tele SaddlesMachined from billet stock. (set of 3) Brass.The Enhanced Vintage saddles to me is our ...

Short tremolo block for Floyd Rose® and Schaller locking tremolos. Made of brass. Measures 50 x 12.7 x 34 mm. Screw spacing 21/32 inch (17 mm) cent...

Vintage-style five-position pickup selector switch for use on most vintage and contemporary Stratocaster¨ models. Features: Vintage-style five-po...

Genuine Fender¨Vintage Style Telecaster Control Plate. Comes in chrome with mounting screws. Includes: Genuine Fender Part# 099-2058-000 Chrome fi...

The original Floyd Rose® locking tremolo system in chrome finish. Includes matching R2 locking nut, tremolo arm, string guide, and mounting hardw...

Vintage-style three-position blade pickup selector switch for use with American Vintage, American Standard, American Special, Standard, Deluxe and ...

Callaham Vintage S Model "CG" Saddle SetThe Callaham Vintage S Model "CG" Saddle Set includes 6 stamped steel "CG" saddles with stainless intonatio...

Callaham Stainless Steel Tremolo Arm With Parchment Tip (Standard Fender Length & Virtual Pop-In Threads)We offer 3 different length arms with ...

The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface...

The Planet Waves Elliptical End Pin was designed to secure the strap to your guitar without any bulky hardware or dedicating a strap to a specific ...

Callaham Stainless Steel Tremolo Arm With Parchment Tip (Standard Fender Length Standard Full Threads)We offer 3 different length arms with either ...

Fender vintage style Stratocaster tremolo bridge mounting screws, package of 12. Fender part number 001-6170-049. Features: Set of 12 replacement...

Many of Fender"s Pure Vintage hardware and bridges are crafted where possible on the same tooling and machinery as our original-era Fender parts. S...

This Is Bigsby®'s B50 Licensed Die Cast Version Of Their Famous B5 Bridge. Commonly Used On Solid Body Guitars. It Is Manufactured Of Diecast Alumi...

Genuine Fender Jazz Bass Concentric Stack Knob Set. Includes Upper & Lower Knobs. Fits US Spec CTS concentric pots, as used in  most Fender Jaz...

Perhaps the most vintage correct replacement bridge available on the market today! No rattle-causing retainer wire! Flat top saddles provide tight,...

Kluson Adapter Bushings (SET 6) Nickel - Converts 10mm to 1/4" Vintage These Kluson¨ steel replacement - adapter bushings are intended for use in c...

In order to meet the need for a narrow spaced Hardtail, we manufacture American Standard Hardtail Bridges in 3 configurations. They all have 2 1/16...

This bridge will do for a Tele what our strat bridge does for strats. It will increase sustain, volume, and eliminate unwanted feedback problems as...

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is rev...

Set of two threaded steel bridge-pivot screws used to mount two-point synchronous tremolo systems on American, Ultra, and American Standard Stratoc...

Callaham tremolo blocks are machined from cold rolled non-leaded U.S.A steel and threaded for 10-32 English threaded arms. Both string and mounting...

Set of two plastic "barrel" switch tips for use on most U.S.- and Mexico-made Telecaster models manufactured from 1952-present. Features: Set of t...

Set of three plastic push-on control knobs designed to fit 1/4" split-shaft potentiometers on nearly all U.S.- and Mexico-made Stratocaster models ...

Fender Black-Plated Steel Tremolo Tension Springs (Set of 6) 0018671049 Set of 6 Fender Black-Plated Steel Tremolo Tension Springs. It's never been...

Manufactured by Oak Grigsby to their exacting standards. Exact replacement 4-way Oak Grigsby switch for Fender Teles or an upgrade for any other Te...

Jack ferrule for use on nearly all U.S.- and Mexico-made Stratocaster guitars manufactured from 1954-present. Mounting hardware included.

Chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mount...

The most reliable and hassle-free instrument strap lock system ever devised. No need to remove or replace existing strap buttons on your guitar; ju...

Genuine Fender American Series Telecaster chrome plated brass right handed bridge plate. Brand New. Genuine Fender 0028184000. UPC 717669066376. Pl...

If you have an acoustic or vintage guitar, you owe it to yourself to hear the difference a TUSQ nut, saddle and bridge pins make. Compared to stand...

Four-hole control plate fits most U.S.- and Mexico-made Jazz Bass® models manufactured from 1964-present. Mounting screws included. Plated brass c...

Now you can install a Bigsby B7 Vibrato on your arch top guitar without drilling any holes! The Vibramate V7-335 Model Mounting Kit is designed for...

Useful in maintaining your highs when you roll back your volume control. Note that it does brighten your overall sound when at full volume. Most us...

The Planet Waves Elliptical End Pin was designed to secure the strap to your guitar without any bulky hardware or dedicating a strap to a specific ...

Pure Vintage '58 Telecaster Knurled Knobs, set of 2 chrome. Fender part number 009-4057-049. Features: Set of two flat-top chrome-plated aluminum ...

The Bigsby vibrato tailpiece is a type of vibrato device for electric guitar constructed by Paul A. Bigsby. The device allows musicians to bend the...

Designed For Archtop Solidbody And Semi-solidbody Electric Guitars Such As Gibson® Les Paul® Standard/custom, Gibson® ES-335®. Does Not Include Br...

Designed to keep your instrument safe, even during the most strenuous stage acrobatics, Fender Infinity Locks are crafted from durable steel. 360 d...

Vintage-style neck plate for use on most U.S.- and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjust...

Manufactured by CRL to their exacting standards. These switches have been the standard for over 60 years. Bulk pack of 10 switches CRL Original De...

Neck plate stamped with "Fender® Corona California," for use on most Fender basses using four-screw neck mounting without Micro-Tilt™ adjustment. M...

This set comes complete with 2 buttons, 2 screws. These are standard guitar buttons and will work for most applications. Durable finish ensures yea...

Faber¨ ABRM Bridge: For 4MM metric bridge posts and the Faber¨ E-Sertª, when the E-Sertª is used for conversion of Epiphone and many other non U.S....

Brand New Genuine Fender¨ Pure Vintage 1954 Stratocaster¨ White Accessory Kit.Includes white-colored polystyrene tone and "Tall Boy" / "Small-Skirt...

Genuine Fender Movable Intonating Compensated Tele Saddle Kit. Comes with everything you need to retrofit your Tele 3-saddle bridge. If you don't w...

There is an age-old dilemma plaguing all vintage guitar lovers. What if my vintage saddles break and I need to replace them? "Will my tone change? ...

Set of five Stratocaster¨ tremolo tension springs for use on American Vintage series and Custom Shop instruments. Part# 003-1643-049 Set of five n...