Guitar Hardware

Screw-in tremolo arm with white tip for use on most right-handed American Vintage series Stratocaster models manufactured from 1986-present.

Genuine Fender® USA Vintage Series Strat tremolo assembly in chrome finish. Complete kit with all of the modern appointments for great tone and smo...

Lose a spring for your Fender¨ bridge or tremolo assembly? Replace it with genuine Fender parts, all of which are dutifully crafted with the same a...

Following up on the success of the innovative Faber® iNsert, we are happy to announce the new Faber® E-sert, for most Epiphone and many other Japa...

Set of 12 genuine Fender white felt washers used to buffer strap buttons from instrument finishes.

Brand new, Genuine Fender¨American Series Tremolo Arm for Stratocaster. 10-32 SAE thread. Gold finish w/white tip. For American Standard/American S...

Faber¨ ABRM Bridge: For 4MM metric bridge posts and the Faber¨ E-Sertª, when the E-Sertª is used for conversion of Epiphone and many other non U.S....

Callaham Tele Bridge Assembly for American Standard Guitars w/ 3 Enhanced Compensated Saddles This is a direct replacement for American Standard (A...

Here is a quality Gotoh 6 saddle humbucking bridge for Telecaster¨ gold, with rectangular saddles, 2-1/16" string spacing. String through body.   I...

Genuine Fender gold string guides (string trees) help minimize tuning problems and sympathetic overtones caused by low string tension. Mounting har...

This Vibramate¨ mounting plate is designed for usage on a flat top solid body electric guitars like the SG¨ or Telecaster¨, which use the Bigsby¨ B...

There is an age-old dilemma plaguing all vintage guitar lovers. What if my vintage saddles break and I need to replace them? "Will my tone change? ...

Chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, ...

This kit is for the new for 2017 Fender American Professional bridge. Although touted as a new and improved model, it still uses the powdered metal...

Genuine Fender Vintage Series 3-saddle Telecaster bridge in chrome. Genuine "Fender" is stamped on the bridgeplate. 2-1/8" string spacing. Chrome f...

Bigsby B50 Tele Conversion Kit - Chrome Here's a Bigsby® setup for a Tele® that really works! It uses a WD® custom-made bridge and metal adapter...

The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface...

Many of Fender’s Pure Vintage parts are crafted where possible on the same tooling and machinery as our original-era Fender parts. Whether you are ...

Machined steel tremolo block with silver powder-coat finish, for use on American Standard series Stratocaster¨ models manufactured from 2008-presen...

Callaham Strat Stainless Steel Saddle Screw Kit - American Standard StyleThis is a great upgrade kit or restoration kit for any U.S. made Strat sad...

Fender Bass/Telecaster¨ Bridge/Strap Button Mounting Screws 002-1422-049 Replace, Repair and Restore your valable instrument with Genuine Fender Pa...

This is a vast improvement over the original Bigsby® OEM bridge, which has no provision for intonation. This bridge is fully intonatable on all six...

WD quality nickel jack plate with 2 stainless steel screws.

Brand new set of 6 genuine Fender tuning key bushings. Used on a variety of vintage and contemporary models including all US made vintage RI '57 '6...

The BSWKIT will give your Nashville bridge equipped guitar the vintage look, while, at the same time, enhancing your tone with steel posts that pro...

Callaham .375 Stainless Steel String Ferrules (Full Set of 6)Set of 6 Callaham styled ferrules used on Callaham Guitars. .375

Perhaps the most vintage correct replacement bridge available on the market today! Flat top saddles provide tight, 100% mechanical contact in the A...

Vintage-style six-saddle bridge assembly for use on American Vintage series and Deluxe Nashville Telecaster guitars. Includes string-through-body p...

Sold in sets of 6, for use with Faber¨ Tone-Lock tailpiece studs, INCH or METRIC. Sold in sets of 6. Two each in 2.5mm, 4.0mm and 5.5mm.   Enables ...

All Pro Sustainer System™ parts can now be ordered in one convenient “Master Kit,” at a 5% discount over buying the parts separately. The Tone-Lock...

Replacement saddles, WITH small starter notches dead center, for all Faber bridges that have removable saddles. Includes extra retaining Replacemen...

Callaham Mexican Standard Premium Upgrade Kit This is a premium upgrade kit that is a direct upgrade on Mexican Standard guitars. It has a 2 1/16 s...

Set of two knurled domed control knobs with mounting set screws, designed to fit 1/4" solid-shaft potentiometers on most U.S.- and Mexico-made Tele...

Genuine Fender¨ USA vintage Strat¨ tremolo assembly in gold finish. Complete kit has all of the vintage appointments for great tone and the correct...

Our exclusive No Gap technology is also available in our Tone-Lockª Bridge. Light years ahead of the usual set screw method of locking a bridge to ...

Replacement bridge studs for Epiphone and other non USA made guitars. Works with Faber ABRM or Tone-Lockª Bridge. Simply remove & replace exist...

Callaham Vibrato / Tremolo Replacement Blocks (2006 Enhanced American Standard)Callaham tremolo blocks are machined from cold rolled non-leaded U.S...

Our basic “Tone-Lock”™ is comprised of unique “vintage” STEEL studs and spacers, featuring our solid “No Gap” technology, and can be used with any ...

Truss Rod Washers, Vintage Guitar/Bass, .204x.367, Brass (12). Set of 12 flat brass truss rod washers used on most vintage and contemporary U.S.- a...

Many of Fender’s Pure Vintage parts are crafted where possible on the same tooling and machinery as our original-era Fender parts. Whether you are ...

With the Faber® iNsert™, you now have the option of replacing the tone robbing pot metal inserts in your Nashville bridge equipped guitar with the...

Many of Fender"s Pure Vintage hardware and bridges are crafted where possible on the same tooling and machinery as our original-era Fender parts. ...

Replacement saddles, WITH small starter notches dead center, for all Faber¨ bridges that have removable saddles. Includes extra retaining Replaceme...

Callaham (3) Enhanced Vintage Compensated Tele Saddles - Stainless SteelMachined from billet stock. (set of 3) Stainless Steel.The Enhanced Vintage...

Lightweight aluminum compensated wraparound tailpiece based on the original lightning design. Tired of playing only to the 7th fret? This is the so...

Perhaps the most vintage correct replacement bridge available on the market today! Flat top saddles provide tight, 100% mechanical contact in the A...

Our exclusive “No Gap” technology is also available in our Tone-Lock™ Bridge. Light years ahead of the usual “set screw” method of locking a bridge...

German steel, in 8M x 1.25 thread pattern. Will fit most imports with 8M x 1.25 insert bushings, or the Faber¨ TPM metric tailpiece bushings. NOTE:...