Faber 3031-1-EST Tone-Lock Bridge Plus Aged Nickel
by Faber
$171.00
Light years ahead of the usual “set screw” method of locking a bridge to the studs, one look at our system will show its design superiority and how it actually can increase sustain! Pre notched NICKEL PLATED BRASS SADDLES standard.
Standard in this Tone-Lock™ Bridge Kit:
Tone-Lock™ Bridge – Standard Matching Pre-Notched Saddles
E-Sert™ – “Plus” E-Sert Bridge Posts
Tone-Lock™ Lock Nuts – Pair of 4mm Lock Nuts
Lock Nut/Tailpiece Stud Tool – Corsa-Faber Locknut Tool
Standard in this Tone-Lock™ Bridge Kit:
Tone-Lock™ Bridge – Standard Matching Pre-Notched Saddles
- Length: 3.31″/84.1mm
- Saddle radius: 12″
- Post spacing: 2.91″/74.0mm (0.8mm lock nut clearance to accommodate 73.6mm-74.4mm post spacing)
- Post hole diameter (stepped): upper, .293″/7.45mm; lower, .2165″/5.5mm
- String Spread (center-to-center, outer saddles): 2-1/16″/2.0625″/52.39mm
E-Sert™ – “Plus” E-Sert Bridge Posts
- Overall length: 1.42” / 36.05mm
- Length below flange: .78” / 19.85mm
- Stud length, above flange: .59” / 15.08mm
- Thread pitch: 4M x .7
- Diameter, knurled section: .484” / 12.2mm
- Diameter, below knurled section: .454” / 11.55mm
- Flange diameter: .565” / 14.35mm
- Flange thickness: .044” / 1.1mm
- Thumbwheels: Diameter: .63″/16mm, Thickness: .11″/2.8mm
Tone-Lock™ Lock Nuts – Pair of 4mm Lock Nuts
Lock Nut/Tailpiece Stud Tool – Corsa-Faber Locknut Tool
